Visteon Electronics Germany GmbH 9178 用户手册

The selector button 

→ 

4

 can be turned or

pressed. When turned, lists are searched or radio

station lists or of media titles are opened. When

pressed marked records are accessed, configura-

tions are set and functions started or interrupted.



Only 32 mm x 24 mm x 2,1 mm (1,26 x 0,94 x

0,083 inch) or 32 mm x 24 mm x 1,4 mm (1,26 x

0,94 x 0,055 inch) SD cards can be inserted into

the SD card slot 

7

.

Only supported audio files are shown

→ 

Inserting an SD card
Insert the SD card carefully into the SD card slot

with the chamfered edge up and the inscriptions

to the left (contact surfaces downward).
If the SD card cannot be inserted, check the in-

sertion position and the SD card.

Ejecting the SD card
To prevent data loss, an inserted SD card must be

prepared for ejection by the following procedure:


 

SETUP

  

Safely remove.

  



 SD card

.

Next, press the inserted SD card. The SD card

“jumps” into ejection position and can be re-

moved.

Unreadable SD card
When a memory card with unreadable data is in-

serted, a corresponding message is shown on the

radio's display.

Volkswagen is not responsible for SD cards

and same are not offered together with the

radio. It is necessary to have an SD card to use it

on the radio.

Do not use any SD card adapter.

An SD card with navigation data cannot be

used as storage for other files, the saved

files are not recognized by the radio.







Fig. 2  Schematic representation: overview of possi-

ble function surfaces on the display.

The device is equipped with a touchscreen

3

.

Active display areas with recorded functions are

referred to as “function surfaces” and operated

by brief touches or extended touches on the dis-

play. Function surfaces are described herein by

the word “function surface” and the button sym-

bol 

    

.

Function surfaces start specific functions or open

other submenus. The currently selected menu is

indicated on the title line of submenus 

→ 

1

.

Inactive function surfaces (grey) cannot be cur-

rently selected.

1

The title line indicates the currently se-

lected menu and, eventually, other

function surfaces.

2

Touch to open a different menu.

3

Gently press to move the target over

the display in a single move.

