ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED HK0001 用户手册

下载
页码 6
4
When the transmitter is opened the aerobatics mode, the helicopter is under the 3D aerobatics mode. In this 
mode, the throttle curve is remain at 100% and becomes a  V  shape status. If the throttle curve change from 
0% to 100%, the pitch curve change from -10.5 degrees to +10.5 degrees (factory default setting). This is the 
preferred flight mode for aerobatics flight. (The user can use the GWY setting module or connection wire to 
connect with the computer to reset the pitch and throttle curve)
Pitch Curve 
0
+10.5
-10.5
-10.5
Throttle Curve 
50%
100%
0%
Normal
 
When the transmitter is closed the aerobatics mode, the throttle curve is linear from 0% to 100%. The helicopter 
under this mode, it will change the setting depends on throttle curve from 0% to 100% and the pitch curve from -3 
degrees to +10.5 degrees (factory default setting). This is the preferred flight mode for general hovering and basic 
flight. (The user can use the GWY setting module or connection wire to connect with the computer to reset the 
pitch and throttle curve)
Aerobatics
Throttle Curve 
50%
100%
0%
Bottom
High
Throttle Control Stick
Pitch Curve 
0
+10.5
-10.5
+10.5
+10.5
6.
Normal and aerobatics mode
GWY
 6T channel helicopter is installed an aerobatics curve in the transmitter, switch off the transmitter, the pitch and 
throttle is automatically exchange into suitable for aerobatics mode used. The picture below: (Left throttle).
 
F MODE / OFF
F MODE / ON
-3
Bottom
High
Throttle Control Stick
Bottom
High
Throttle Control Stick
Bottom
High
Throttle Control Stick