OSD Audio.Inc JAPC 用户手册
5
4. DIGITAL COAXIAL INPUT -
One RCA jack. Connect to the
Digital Coaxial OUT on a TV or
other source. This input is selected
by pressing the COAX button on
the SOUND STAGE IR Remote.
NOTE: The audio output of a TV,
Blu-ray Disc player, game console,
or DVD player connected to the
SOUND STAGE via Coaxial Digital
must be set to PCM in the source’s
setup. Please see the device’s
Owner’s Manual for details.
One RCA jack. Connect to the
Digital Coaxial OUT on a TV or
other source. This input is selected
by pressing the COAX button on
the SOUND STAGE IR Remote.
NOTE: The audio output of a TV,
Blu-ray Disc player, game console,
or DVD player connected to the
SOUND STAGE via Coaxial Digital
must be set to PCM in the source’s
setup. Please see the device’s
Owner’s Manual for details.
5. DIGITAL OPTICAL INPUT - One TOSLINK® connector. Connect to the Digital Optical OUT on a TV or other source. This
input is selected by pressing the OPT button on the SOUND STAGE IR Remote.
input is selected by pressing the OPT button on the SOUND STAGE IR Remote.
NOTE: The audio output of a TV, Blu-ray Disc player, game console, or DVD player connected to the SOUND STAGE via
Optical Digital, must be set to PCM in the source’s setup. Please see the device’s Owner’s Manual for details.
Optical Digital, must be set to PCM in the source’s setup. Please see the device’s Owner’s Manual for details.
6. AUDIO INPUT - Two RCA jacks. Connect to the L & R Line Level Audio OUT on a TV or other source. This input is selected
by pressing the AUX button on the Pro-Connect SOUND STAGE IR Remote.
by pressing the AUX button on the Pro-Connect SOUND STAGE IR Remote.
7. POWER - Turns the power to the Pro-Connect SOUND STAGE ON/OFF. Always turn the power OFF when making connec-
tions to the SOUND STAGE. The Front Panel LED will illuminate red to indicate Standby (power switch ON, SOUND STAGE
turned OFF with IR Remote) or blue to indicate that the SOUND STAGE is ON.
tions to the SOUND STAGE. The Front Panel LED will illuminate red to indicate Standby (power switch ON, SOUND STAGE
turned OFF with IR Remote) or blue to indicate that the SOUND STAGE is ON.
8. AC INPUT-Universal power connector. Automatically selects AC voltage for a given region. Connect to the included
2-conductor AC Power Cord. After all audio connections have been made and confirmed, plug the power cord into an
un-switched AC Outlet to power the SOUND STAGE.
2-conductor AC Power Cord. After all audio connections have been made and confirmed, plug the power cord into an
un-switched AC Outlet to power the SOUND STAGE.
9. DOWN FIRING SUBWOOFERS - The SOUND STAGE bottom panel features two 5-1/4” subwoofers, one for left channel
bass and one for right channel bass. When handling the SOUND STAGE, be careful not to grab or hold the cabinet bottom
where the woofers are located to prevent damaging the woofers. Also take care to not set the cabinet down on anything but a
flat surface clear of obstructions.
bass and one for right channel bass. When handling the SOUND STAGE, be careful not to grab or hold the cabinet bottom
where the woofers are located to prevent damaging the woofers. Also take care to not set the cabinet down on anything but a
flat surface clear of obstructions.
CONNECTION PANEL
When placing the SOUND STAGE
on a shelf or stand, be sure there
are no objects under the cabinet
that will damage or block the woof-
ers and check to make sure there
are no objects on the sides of the
cabinet that will block the space
under the SOUND STAGE. Block-
ing this space will reduce overall
bass performance.
on a shelf or stand, be sure there
are no objects under the cabinet
that will damage or block the woof-
ers and check to make sure there
are no objects on the sides of the
cabinet that will block the space
under the SOUND STAGE. Block-
ing this space will reduce overall
bass performance.
7
8
6
5
4
Shown With Grill
Shown Without Grill
9