XYZprinting Inc. 3L10X 用户手册
Safety and Compliance
Before you use, operate the product, replace or remove any part, component or material of the product, or maintain
the printer, please ensure that you carefully read this Product Manual and the safety
instructions described below, and strictly follow the instructions of such safety information.
For the latest information about Nobel 1.0 3D Printer and XYZprinting products, please visit XYZprinting website
(http://www.xyzprinting.com) or contact your sales representative.
The following warnings and attention notices are a best effort attempt to cover all scenarios;
unfortunately it is not possible to do so. In the case of performing maintenance procedures that are not described in
this manual the burden of safety falls to the customer side.
Resin Care
•Wear proper protective equipment, avoid raw material contact and vapor inhalation.
•Chemical-resistant gloves should be worn when you may contact resin.
•Avoid exposing resin to high temperatures, localized heat sources (i.e., drum or band heaters), oxidizing
•Chemical-resistant gloves should be worn when you may contact resin.
•Avoid exposing resin to high temperatures, localized heat sources (i.e., drum or band heaters), oxidizing
conditions, freezing conditions, direct sunlight, ultraviolet radiation, inert gas blanketing.
•Never pour the waste resin back to the bottle cartridge or down the sink, as it may pollute the remaining resin or
•Never pour the waste resin back to the bottle cartridge or down the sink, as it may pollute the remaining resin or
clog the drain.
•You may pour waste resin into plastic bag and expose it to sunlight or UV light source to cure the resin. The cured
•You may pour waste resin into plastic bag and expose it to sunlight or UV light source to cure the resin. The cured
resin can be discarded as trash.
•Avoid dripping resin on anything other than the platform or the resin tank, or the printer may be malfunctioned.
•Avoid dripping resin on anything other than the platform or the resin tank, or the printer may be malfunctioned.
★ For complete protection suggestion, precautions, clean-up procedures, handling procedures, storage procedures,
see MSDS for details.
Copyright
All other trade names and trademarks are properties of their respective owners.
Important Safety Information:
•Do not let children operate this device without adult supervision. Moving parts may cause serious injury.
•Electric shock hazard.
•Do not place the printer on an unleveled or unstable surface. Printer may fall or tumble causing harm and/or injury.
•Electric shock hazard.
•Do not place the printer on an unleveled or unstable surface. Printer may fall or tumble causing harm and/or injury.
Also tank level detection may be inaccurate.
•Do not place any object on top of the printer. Liquid and objects that fall into the printer may lead to printer
•Do not place any object on top of the printer. Liquid and objects that fall into the printer may lead to printer
damage or safety risks.
•Do not use flammable chemical or alcohol wipes to clean this device.
•Do not disassemble or replace the printer cover with none XYZprinting covers.
•Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.
•Do not attempt to service the printer beyond the instructions specified in this document. In the case of
•Do not use flammable chemical or alcohol wipes to clean this device.
•Do not disassemble or replace the printer cover with none XYZprinting covers.
•Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.
•Do not attempt to service the printer beyond the instructions specified in this document. In the case of
irrecoverable problem, contact XYZprinting service center or your sales representative.
•Do not place the printer in humid or dusty environments such as bathrooms and high traffic areas.
•Some components of the printer move during operation. Do not attempt to touch or change anything inside
•Do not place the printer in humid or dusty environments such as bathrooms and high traffic areas.
•Some components of the printer move during operation. Do not attempt to touch or change anything inside
before powering off the printer.
•Please keep the lid closed during printing to avoid injury.
•This printer is a Class 1 Laser Product. A Class 3B laser module is used as a light source. Never disassemble the
•Please keep the lid closed during printing to avoid injury.
•This printer is a Class 1 Laser Product. A Class 3B laser module is used as a light source. Never disassemble the
product.
•For optimized printing quality and well-functioning of the machine, this printer is only to be used with resin
•For optimized printing quality and well-functioning of the machine, this printer is only to be used with resin
supplied by XYZprinting.
•Make sure to set the power switch to the off position and remove the power cord before transporting the device.
•Only use the grounded power adapter and power cord supplied with the printer to prevent a possible electrical
•Make sure to set the power switch to the off position and remove the power cord before transporting the device.
•Only use the grounded power adapter and power cord supplied with the printer to prevent a possible electrical
shock.
•Please place and use the printer in a well ventilated area. The process of printing will produce a small amount of
•Please place and use the printer in a well ventilated area. The process of printing will produce a small amount of
non-toxic odor. Having a well ventilated area will ensure a more comfortable environment.
V1
-2-
Resin Tank Care
•
Due to the nature of the print technology and material, the resin tank may
develop cloudy regions overtime at where the laser spot going through
frequently, and may lead to print fails. Moving the print location around the
platform can help prolong the life of the tank.
•
One tank lasts for about 1L of resin. Change to a new tank when over 2/3 of the
surface gets cloudy.
•
Use separate resin tank for resin of different color. Mixing resin of different color
may affect printing quality.
Cloudy