XYZprinting Inc. 3L10X 用户手册
V1
-2-
Shake the resin cartridge to ensure
even color.
Assemble nozzle cap and the tube
(placed in rinse basket when
shipped).
Change to nozzle cap.
Unpacking & Setup
After removing all external packing
materials and tapes…
Take off the lid and remove accessory
tray over the platoform.
Connect power adapter, power cord
and the printer.
Switch on the printer.
Raise the platform:
On the printer screen, select
“UTILITIES” and press ► to find
“MOVE PLATFORM”>”TO TOP”.
And press “YES” to raise the
platform.
When the platform is moved to the
top, remove the protecting foam.
V1
-3-
Unpack the resin tank and insert it
into the tank slot.
Install filling tubes.
Push the tubes all the way down.
Black tube (thick) should be
attached to wide nozzle, and
transparent tube (thin) to narrow
nozzle.
Put on the lid, and it’s ready for
printing.