QINGDAO TRI-LINK LOCK GROUP CO. LTD WSY319 用户手册
PC: Programming Code
UI: User ID (01-50,2 digits)
UC: User Code (
4
-8 digits)
1. To unlock the lock
Using Keypad: Enter a valid user code and press
and hear 1 beep and lights green.
Using Remote: Press remote
button. You will hear 1 beep and see a green light.
2. To lock the lock
Using Keypad: Press
and then hear 2 beeps and lights red.
Using Remote: Press remote
button. You will hear 2 beeps and see a red light.
3. Add a new user code (You can add up to
50
new user codes)
PC-
-1-
-
UI
-
-
UC-
-Re-enter UC-
. The lock will beep once and light green
4. Delete one existing or preset user code
PC-
-2-
-
UI
-
-
Re-enter UI
-
.The lock will beep once and light green.
5. Delete all user codes
PC-
-3-
- Re-enter PC -
(This will delete all user codes but not the programming code.)
6. Change current or preset programming code
PC-
-4-
-New PC-
-Re-enter New PC-
.
7. Auto-Lock Function
PC-
-5-
- Numbers for Auto lock period (Start from 20-900 seconds, other numbers will be
invalid, if input 00, the auto-lock function will be cancelled).
8. Add a new remote controller (up to
20
remotes per lock)
Press the button on the back panel for 3 seconds, you will hear a short beep, and then press any
button on the remote controller to learn, if success, you will hear a short plus a long beep, if not
success, 2 short beeps.
9. Delete all remote controllers
Press the button on the back panel, after 3 seconds you will hear a short beep, do not use remote
controller to learn, keep on pressing it for another 3 seconds, you will hear a long beep. All remote
controllers are now deactivated.
(In short, press the button on back panel for more than 6 seconds,
all remote controllers will be deleted)
10. Reset programming code to the original factory settings
Remove one battery and wait 10 seconds. Reinsert the battery and wait for the long and short
beeps. Press
button 3 times within 3 seconds. The lock will beep and light green.