Ulterius Technologies LLC FDN40 用户手册
CHAPTER 8: IKE
Configuration User Manual
183
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
8.3 IKE Examples
This chapter provides the sample topology setup and various sample
configurations of IKEthrough CLI.
configurations of IKEthrough CLI.
Figure 8-1: IKE Topology
Node
Interface Index/Name
Interface IP Address
DUT1
WAN
35.0.0.1
DUT2
WAN
35.0.0.2
DUT1
LAN
192.168.1.1
DUT2
LAN
192.168.2.1
H1
E0
192.168.1.10
R1
E0
192.168.2.10
8.3.1
General Configuration
To configure a WAN port, execute the following CLI commands:
UltOs#configure terminal
UltOs(config)# interface wan 0/1
UltOs(config-if)# shutdown
UltOs(config-if)# ip address 35.0.0.1 255.255.255.0
UltOs(config-if)# no shutdown
UltOs(config-if)# end
8.3.2
Configuring IKEv1 - Tunnel Mode - Preshared key
Tunnel mode is most commonly used between gateways, or at an end-
station to a gateway. The gateway acts as a proxy for the hosts behind it.
station to a gateway. The gateway acts as a proxy for the hosts behind it.
In IKE Topology , tunnel mode is used to setup an IPSec tunnel between H1
and R1.
and R1.
FDN40
DUT2 / Ravpn Client /
Ravpn Server)
Ravpn Server)
R1
DUT1
FDN40
H1
WAN
WAN
LAN
LAN
E0
E0