Extron Electronics EXTSL250W 用户手册
ShareLink 250 W • Operation Using a Computer
12
Setting Up the ShareLink 250 W Software
There are two versions of the ShareLink 250 W software:
•
Lite version: No installation required. Users can run the Lite software from the
embedded Web pages without having to install the software on the PC. Since
installation is not required, users do not need admin rights to run the Lite software (see
“Running the ShareLink 250 W Lite Software”
installation is not required, users do not need admin rights to run the Lite software (see
“Running the ShareLink 250 W Lite Software”
below).
•
Pro version: Installation required. The executable software file can be downloaded
from the embedded Web pages or from the Extron website (see
on the next page).
To see a list of the different Lite and Pro
software features, click the information
(
software features, click the information
(
) icon on the landing page (see figure 9).
An information window opens as shown at
right.
right.
Running the ShareLink 250 W Lite Software
1.
Ensure that the computer is connected to the ShareLink 250 W device, either through
an external WAP or through a physical network connection. The computer and the
ShareLink 250 W must be on the same network.
an external WAP or through a physical network connection. The computer and the
ShareLink 250 W must be on the same network.
2.
Launch your Web browser and enter the IP address of the ShareLink in the browser.
NOTE: The IP address is shown on the standby screen (see
,
6
, page 6).
The ShareLink 250 W landing page opens as shown below:
Figure 9.
ShareLink 250 W Landing Page
3.
Click Windows (
1
) or Mac (
3
), depending on your operating system, to launch the
software.
4.
Follow the instructions on the Web browser to run the the executable ShareLink 250 W
software file. When the Lite software opens, it automatically attempts to connect to your
ShareLink receiver.
software file. When the Lite software opens, it automatically attempts to connect to your
ShareLink receiver.
5.
If the Login window opens (as shown at right),
enter the login code into the Code field and
click Connect.
NOTE: The login code is shown on the
standby screen (see
9
, page 6).