Extron Electronics EXTSL250W 用户手册

Operation Using a 
Computer

Users can present from a Windows or Mac computer using the ShareLink 250 W software. 
This section covers the following:

• 

• 

• 

NOTES: 

Mac computer minimum system requirements:

Dual Core, 1.4 GHz processor or better

Mac OS X 10.7 - 10.10

Graphics card with 64MB VRAM or better

Windows computer minimum requirements:

Dual Core, 1.8 GHz processor or better

Microsoft Windows 7 or 8

Graphics card with 64MB VRAM or better

Connecting a Computer to the ShareLink 250 W

There are three ways to connect a computer to the ShareLink 250 W:

• 

Wirelessly, through the ShareLink 250 W internal wireless access point (WAP)

• 

Wirelessly, through an external WAP

• 

Wired through a network device

See instructions below for your preferred connection method.

Connecting through the ShareLink 250 W Internal WAP

Ensure that the ShareLink 250 W is powered and that wireless 
network capability is enabled on your computer.

Open the wireless networks on your computer (see image at 
right) and connect to the ShareLink 250 W unit.

NOTE:  The ShareLink Wi-Fi name (SSID) is shown on the 

standby screen (

8

 

on page 6).

Connecting through an External WAP

Ensure that the external WAP and the ShareLink 250 W are 
wired to the same network.

Ensure that the ShareLink 250 W is powered on and that 
wireless network capability is enabled on your computer.

Open the wireless networks on your PC and connect to the external WAP.

Connecting through a Network Hub, Switch, or Router

Ensure that your computer is connected to the network through a hub, switch, or router.

Connect the RJ-45 connector of the ShareLink 250 W to the network device using an  
RJ-45 cable.