Roseman Engineering Ltd. 2288 用户手册
998 Old Eagle School Road, Suite 1215
|
Wayne, Pennsylvania 19087
|
T: 610-225-8350
|
F: 610.971.9447
|
www.assetworks.com
71
Instructions for Flash Tool FJ3 Box V1
FOR FJ3 with p/n RID-FG3-04-AW you will use both cables from the Flash Tool
1. Connect the two cables of the Flash Tool # PRG-FG3-04 to the FJ3 as shown:
Connect the 4 pin plug to TPMS connector
Connect the 6 pin plug to the PROG connector
Connect the 6 pin plug to the PROG connector
2. Ensure that the FJ3 has 12V by validating the red light is lit on the flash tool
3. Press the black flash push Button for 2 seconds. The green light will blink during the flashing
3. Press the black flash push Button for 2 seconds. The green light will blink during the flashing
process. When flashing is complete, the green light will stay lit (solid).
Figure 11 Flash Tool Connections
Flash Tool
#PRG-FG3-04
#PRG-FG3-04
Power In 12V
Indicator LED'S
PRG
TPMS
Flashing Push Button