Transition Networks C2110-1019 产品宣传页
The ION Platform
Specifications
Standards
IEEE Std. 802.3
Data Rate
100 Mbps, Layer-1
Switches
SW1: Auto-Negotiation (UP = enabled)
SW2: Pause (UP=enabled)
SW3: Link Pass Through (UP = enabled)
SW4: Far-End-Fault (UP = enabled)
Internal Jumpers
AutoCross™: Enable/Disable
Hardware/Software Jumpers
Hardware: Mode of operation is determined by the
settings on the 4-position switch
Software: Mode of operation is determined by the
most recently saved on-board microprocessor settings
Status LEDs
PWR (Power): ON = Connection to powered backplane
LKC (Copper Link): ON = Copper Link
RXC (Receive Copper): Blinking = Data recieved on
Copper link
LKF (Fiber Link): ON = Fiber Link
RXF (Receive Fiber): Blinking = Data received on
Fiber Link
Dimensions
Width: 0.86” [22 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86 mm]
Power Consumption
2.5 Watts, 200 mA @ 13.9 VDC
Environment
See chassis specifications
Shipping Weight
1 lb. [.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty
Lifetime
C2110 Series
C2110 Series
Fast Ethernet Media Converter
100BASE-TX to 100BASE-FX
Fiber Integration in 10/100 Copper Environments
The ION C2110 device provides an interface between 100Base-TX
ports and 100Base-FX ports allowing users to integrate fiber optic ca-
bling into 100Base-TX copper environments.
Fast Ethernet
slide-in-module for the ion platform
see also:
Fast Ethernet 100BASE-TX to 100BASE-FX Stand-Alone Media Converters
4
Report converter status to
chassis management software:
• TP and Fiber Link Status
• Hardware switch settings
• Fault condition
• TP cable length
• TP and Fiber Link Status
• Hardware switch settings
• Fault condition
• TP cable length
4
Write operation includes:
• Power on/off device
• Auto-Negotiation enable/disable
• Pause enable/disable
• LPT enable/disable
• FEF enable/disable
• AutoCross enable/disable [
• Auto-Negotiation enable/disable
• Pause enable/disable
• LPT enable/disable
• FEF enable/disable
• AutoCross enable/disable [
Features
4
Auto-Negotiation of speed
and duplex on TP port
4
AutoCross ™ on TP port [
4
Link Pass Through (LPT1)
fault monitoring
4
Far-End-Fault (FEF) detection
4
Automatic Link Restoration
4
Pause advertisement
4
Field Upgradeable Firmware
4
Can be used in any
ION Platform Chassis
4
Standards based, will link with any
Standard 100Base-TX and any
Standard 100Base-FX ports
Standard 100Base-FX ports
The following manageable features are
available when used in an ION chassis
along with an ION Management Module
available when used in an ION chassis
along with an ION Management Module
Ordering Information
C2110-1011
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1013
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1039
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm MM (LC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1014
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
C2110-1019
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
C2110-1015
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm SM (SC)
[40 km/24.9 mi.] Link Budget: 29.0 dB
C2110-1016
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm SM (SC)
[60 km/32.3 mi.] Link Budget: 29.0 dB
C2110-1017
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
C2110-1035
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[120 km/77.5 mi.] Link Budget: 36.0 dB
C2110-1040
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100Base-X SFP Slot (empty)
Single Fiber Products
Recommended use in pairs
C2110-1029-A1
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C2110-1029-A2
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C2110-1029-B1
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
C2110-1029-B2
100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB