Troy-Bilt HYDROSTATIC LAWN TRACTOR - HORSE 769-06304 用户手册

This tractor is equipped with a safety interlock system for the 

protection of the operator. If the interlock system should ever 

malfunction, do not operate the tractor. Contact an authorized 

Troybilt service dealer.

The safety interlock system prevents the engine from 

• 

cranking or starting unless the parking brake is engaged, 

and the PTO (blade engage) lever is in the disengaged (OFF) 

position.
The engine will automatically shut off if the operator leaves 

• 

the seat before engaging the parking brake.
The engine will automatically shut off if the operator leaves 

• 

the tractor’s seat with the PTO (blade engage) lever in the 

engaged (ON) position, regardless of whether the parking 

brake is engaged.

Warning! Use extreme caution while operating the 

tractor in the REVERSE CAUTION MODE. Always look 

down and behind before and while backing. Do not 

operate the tractor when children or others are 

around. Stop the tractor immediately if someone 

enters the area.

The REVERSE CAUTION MODE position of the key switch 

module allows the tractor to be operated in reverse with the 

blades (PTO) engaged. 

Mowing in reverse is not recommended. 

IMPORTANT: The operator MUST be seated in the tractor seat.

Start the engine as instructed on page 16 under Starting 

1. 

The Engine.
Turn the key from the NORMAL MOWING (Green) position 

2. 

to the REVERSE CAUTION MODE (Yellow) position of the 

key switch module.  See Fig. 5-1.

Depress the REVERSE PUSH BUTTON (Orange, Triangular 

3. 

Button) at the top, right corner of the key switch module. 

The red indicator light at the top, left corner of the key 

switch module will be ON while activated. See Fig. 5-1.
Once activated (indicator light ON), the tractor can be 

4. 

driven in reverse with the cutting blades (PTO) engaged.
Always look down and behind before and while backing to 

5. 

make sure no children are around.
After resuming forward motion, return the key to the 

6. 

NORMAL MOWING position. 

The REVERSE CAUTION MODE will remain 

activated until:

The key is placed in either the NORMAL MOWING 

a. 

position or STOP position.
The operator engages the parking brake by fully 

b. 

depressing the brake pedal and holding it down 

while moving the parking brake lever into the PARK 

BRAKE position.

Start

Position

Stop

Position

Reverse

Push Button

Reverse

Caution Mode

Position

Indicator

Light