Clarity INT9 用户手册

Clarity - INT9 A/D converter

Using the INT9 card

Channel 1 (to 4)
For each channel of the INT9 A/D Converter

the name of the signal can be edited in the

Name

field and the

Set Units...

button

can be used to change other signal parametres.

Effects of these changes can be seen in other

fields of the respective Channel 1 (to 4) section.

Name

This field will be used to describe the signal

in the

Chromatogram

window.

Inversion of Signal

Inverts the polarity of the signal from the

detector. This function can also be used for

easy correction of inversely connected wires.
Bipolar

Both positive and negative voltages will be

measured. Unchecking the

Bipolar

option

will improve the resolution of the signal by 1

bit. On the other hand, it will also restrict

the measuring of negative signals (i.e. below

zero).
Set Units...

Invokes the

Detector Units

dialog.

Fig. 9.

Detector Units

• Quantity – Field for entering the quantity of

the units.

• Units – Field for entering the unit symbol,

along with the prefix.

• Coefficient – Allows to enter the coefficient

between the selected units and mV (default).

• Autoprefix – Allows to enter the unit prefix.

In graphs, units will be scaled automatically,

while in the tables, units with the prefix

entered will be used.