Konica Minolta bizhub C652DS 用户手册
bizhub C652/C652DS/C552/C552DS/C452
5-11
5.1
Basic
5
Offset Yes/No
Specify whether to separate each set of copies from another set in the output
tray when copying multiple sets of multi-page originals.
tray when copying multiple sets of multi-page originals.
When the Finisher or Job Separator JS-504 is not installed:
If the following conditions are met, printed copies are fed out and sorted in an
alternating crisscross pattern.
•
If the following conditions are met, printed copies are fed out and sorted in an
alternating crisscross pattern.
•
8-1/2 e 11, A4 or B5 paper is used
•
Paper of the same size and type is loaded with the w orientation in one pa-
per tray and with the v orientation in another tray
per tray and with the v orientation in another tray
•
Auto paper selection is specified for the paper size setting
When the Finisher or Job Separator JS-504 is installed:
The copies are fed out and stacked on top of each other with each set shifted
to separate it.
The copies are fed out and stacked on top of each other with each set shifted
to separate it.
Fold/Bind
When the Saddle Stitcher SD-508 is installed on the Finisher FS-526:
Half Fold
Center Staple & Fold
Tri-Fold
Z-Fold
To configure the Z folding setting, install the Z Folding Unit ZU-606.
When the Saddle Stitcher SD-509 is installed on the Finisher FS-527:
Half Fold
Center Staple & Fold
Staple
Staples copies in corner or at two points before they are output.
Punch
Punches holes in copies before they are output.
Settings
1