Zebra 77660 用户手册
154
Z4Mplus and Z6Mplus Maintenance Manual
13358L Rev. 1 11/17/03
Section 4
Preventive and Corrective Maintenance
Figure 4-91. Tear Bar Removal
8.
Using a hex key (allen wrench), install the two flanged mounting screws from the
kit into the tear bar mounting screw holes. Tighten them to within 1/8 in.
(3.175 mm) of the platen housing.
kit into the tear bar mounting screw holes. Tighten them to within 1/8 in.
(3.175 mm) of the platen housing.
9.
Refer to Figure 4-92. Take note of the pems and the mounting slots on the rear of the
peel assembly.
peel assembly.
Tear Bar
Mounting Screws
Tear Bar