Fujitsu MAT3300FC 用户手册
4.1 Control/Sense Commands
C141-C008
4-77
means the maximum number of logical data blocks that it is possible to rank
in the "User Space").
in the "User Space").
b. Data block length
This field indicates the length (byte length) of 1 logical data block on the disk
media.
media.
(3) Page descriptor
The "Page descriptor" is configured from a parameter field which follows a 2-
byte page header, and is divided into units called "Page" for each parameter's
functional attributes. See the description of the MODE SELECT command
(Section 4.1.4) concerning the configuration of each page descriptor and their
contents.
byte page header, and is divided into units called "Page" for each parameter's
functional attributes. See the description of the MODE SELECT command
(Section 4.1.4) concerning the configuration of each page descriptor and their
contents.
a. PS
bit
When this bit is "1," the parameter value defined in that "Page descriptor"
can be saved on the disk media, and when it is "0", it indicates that this is a
parameter which cannot be saved to the disk. It is possible to save all the
"Page descriptors" supported by the IDD. However, "1" is always indicated
in this bit for all "Page descriptors" transferred by this command.
can be saved on the disk media, and when it is "0", it indicates that this is a
parameter which cannot be saved to the disk. It is possible to save all the
"Page descriptors" supported by the IDD. However, "1" is always indicated
in this bit for all "Page descriptors" transferred by this command.
b. Page
length
This field indicates the length of the parameter field (number of bytes) from
byte 2, excluding the page header of that "Page descriptor." The IDD always
shows a value in this field which is the same as the length defined in that
"Page descriptor" regardless of the type of parameter requested in the "PC
(page control)" field of the CDB, and reports all the parameter fields that
"Page descriptor" in byte 2 and subsequent bytes.
byte 2, excluding the page header of that "Page descriptor." The IDD always
shows a value in this field which is the same as the length defined in that
"Page descriptor" regardless of the type of parameter requested in the "PC
(page control)" field of the CDB, and reports all the parameter fields that
"Page descriptor" in byte 2 and subsequent bytes.
c. Parameter
field
The parameter field in byte 2 and subsequent bytes, indicates parameter
values of the type (current values, variable values, default values or save
values) requested in the "PC (page control)" field of the CDB. See the
description of the MODE SELECT command (Section 4.1.4) concerning the
definition of each parameter, "Default" values and "Variable" values.
values of the type (current values, variable values, default values or save
values) requested in the "PC (page control)" field of the CDB. See the
description of the MODE SELECT command (Section 4.1.4) concerning the
definition of each parameter, "Default" values and "Variable" values.