Fujitsu MAT3300FC 用户手册

4-78 

C141-C008 

 

 Bit 
Byte 

7 6 5 4 3 2 1 0 

0 X‘5A’ 

1 

0 0 0 0 

DBD 

0 0 0 

2 PC 

Page 

Code 

3 

0 0 0 0 0 0 0 0 

4 

0 0 0 0 0 0 0 0 

5 

0 0 0 0 0 0 0 0 

6 

0 0 0 0 0 0 0 0 

7 

Transfer Byte Length  (MSB) 

8 

Transfer Byte Length  (LSB) 

9 

0 0 0 0 0 0 0 0 

 

This command reports the values for each type of parameter related to the disk 
drive's physical attributes, data format, timing for FC interface Loop 
OPEN/CLOSE processing, error recovery procedures, etc., as well as the 
attributes of those parameters, to the INIT. 

The functions of this command are the same as those of the Group 0 MODE 
SENSE command (Section 4.1.7) except that the format of data (MODE SENSE 
data) transferred to the INIT differs somewhat. 

Table 4.37 lists the data configuration of the parameter list (MODE SENSE data) 
transferred to the INIT by this command.  Compared to the 4-byte header in the 
case of a Group 0 MODE SENSE command, an 8-byte header is transferred in 
this command.  The meanings of each field and bit in the header are the same as 
in the case of the Group 0 MODE SENSE command, except that the byte 
positions differ.  Also, the contents of the other parameters (block descriptor and 
page descriptors) are the same as in the case of the Group 0 MODE SENSE 
command.