Cisco FL-GK-NEW-3745= 用户手册
Chapter 2 Configuring Hosted Unified Communications Services Components Before Loading Bulk Data
Manually Configuring Cisco Unified Communications Manager
2-14
Getting Started with Cisco Hosted Unified Communication Services
OL-15490-01
Ensure that the required numbers of lines are set up on the template settings and
that each phone button template is cloned from the standard phone type for each
variant. For example, confirm that the Standard 7960-2line is based on the
standard 7960 template and set the number of lines to 2.
that each phone button template is cloned from the standard phone type for each
variant. For example, confirm that the Standard 7960-2line is based on the
standard 7960 template and set the number of lines to 2.
Note
The BVSM InitPBX Load fails if Phone Button Templates exists as a BVSM
Service Setting but does not exist in the Cisco Unified CM. If a validation failure
occurs, either add the missing phone button template into the Cisco Unified CM
or delete unneeded phone button templates from BVSM.
Service Setting but does not exist in the Cisco Unified CM. If a validation failure
occurs, either add the missing phone button template into the Cisco Unified CM
or delete unneeded phone button templates from BVSM.
Phone button templates cannot be deleted from the BVSM database without first
disconnecting the dial plans from the hardware sets. To do this, use the BVSM
option Dial Plan Tools > Hardware Sets > Associated Dial plans. Remember to
reconnect the required dial plans afterwards.
disconnecting the dial plans from the hardware sets. To do this, use the BVSM
option Dial Plan Tools > Hardware Sets > Associated Dial plans. Remember to
reconnect the required dial plans afterwards.
When deploying both Cisco Unified CM 4.2(3) and Cisco Unified CM 5.1(3)
clusters on the same platform, it is necessary to add additional standard phone
button templates on the Cisco Unified CM 4.2(3) cluster.
clusters on the same platform, it is necessary to add additional standard phone
button templates on the Cisco Unified CM 4.2(3) cluster.
BVSM does not distinguish between different Cisco Unified CM versions, and
therefore during BVSM InitPBX Load it verifies that all phone button templates
configured in BVSM also exist in Cisco Unified CM. The BVSM API worksheet
for the 5.1(b) model loader lists all the phone button templates that need to be
added to Cisco Unified CM 4.2(3) clusters.
therefore during BVSM InitPBX Load it verifies that all phone button templates
configured in BVSM also exist in Cisco Unified CM. The BVSM API worksheet
for the 5.1(b) model loader lists all the phone button templates that need to be
added to Cisco Unified CM 4.2(3) clusters.
To configure non-standard phone button templates, complete the following steps.
Procedure
Step 1
Choose Device > Device Settings > Phone Button Template.
Step 2
Specify the appropriate values for the following parameters:
•
Phone Button Template: required_phone_button_template
For example: Standard 7960
Use the following setting:
•
Button Template Name: unique_button_template_name
For example: Standard 7960-2lines
Step 3
Configure the required number of buttons: