Cisco CEE 7/7 - IEC-C19 13-ft Europe CAB-CEE77-C19-EU= 用户手册

产品代码
CAB-CEE77-C19-EU=
下载
页码 16
C H A P T E R
   
2-1
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
2
Preparing for Installation
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be 
accessed only through the use of a special tool, lock and key, or other means of security.
 
Statement 1017
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. 
Statement 1030
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the 
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection 
authority or an electrician if you are uncertain that suitable grounding is available. 
Statement 1024
Warning
Class 1 laser product. Statement 1008
If you will be using your switch as a PoE source, the following warning applies:
Warning
Voltages that present a shock hazard can exist on inline power circuits if interconnections are made 
by using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such 
interconnection methods unless the exposed metal parts are in a restricted access location and users 
and service people who are authorized to access the location are made aware of the hazard. A 
restricted access area can be accessed only through the use of a special tool, lock and key, or other 
means of security. 
Statement 1072
This chapter describes how to prepare your site for the installation of the switch. The information is 
presented in these sections: