Philips B5 B5/12 用户手册

9

English

EN

Option 3: Connect audio through analog 

audio cables

Basic quality audio

1 

Using an analog cable, connect the AUX 

connectors on your SoundBar to the AUDIO 

OUT connectors on the TV or other device.

  

4  Spatial calibration

Spatial calibration is used to achieve the following 

convenience, and simultaneously optimizes surround 

sound experience for it.

•

Have freedom to place the portable left and 

right speakers (surround) according to your 

need.

•

Automatically balance the portable speakers 

(surround) with respect to your seating position.

The spatial calibration involves two steps.

•

Step 1: calibrate the listening zone

•

Step 2: calibrate the surround speaker position

When to calibrate

•

If you perform spatial calibration for the first

time, perform Step 1 and Step 2 in sequence.

•

If you re-design your seating layout, perform 

Step 1 and Step 2 in sequence.

•

If you re-locate the portable left and 

right speakers (surround), perform Step 

2 independently (Step 1 can be skipped).

Before you start

•

Make sure that the room is fairly quiet.

•

Place the portable left and right speakers angled 

towards the main unit.

•

Make sure that the main unit, the portable left 

and right speakers can fully "see" each other, 

no obstacle between them blocking such view. 

Stand the portable speakers upright if needed.

•

The minimum distance between the portable 

speakers and the main unit is 0.8m (2.6'), the 

maximum distance 6m (20').

DVD

Step 1: calibrate the listening zone

1 

Place the portable left and right speakers on 

two seating positions you prefer most (such as 

on a sofa).

•

Make sure that the portable left and right 

speakers are wirelessly connected to 

the main unit (press SURROUND ON 

DEMAND).

2 

Press and hold CALIBRATION on the remote 

control for three seconds to trigger calibration.

 

»

ZONE (zone) is displayed on the display 

panel.

 

»

You can hear the calibration tones from the 

portable speakers.

3 

Wait until the calibration tones end.

 

»

->SPKR (speaker) is displayed on the 

display panel. 

4 

Then perform the following Step 2 (calibrate 

the surround speaker position) to complete and 

store the new settings.

Step 2: calibrate the surround 

speaker position

1 

Place the portable left and right speakers 

(surround) on the position you prefer.

•

Make sure that the portable left and right 

speakers are wirelessly connected to 

the main unit (press SURROUND ON 

DEMAND).

2 

Press CALIBRATION once to trigger calibration.

•

Press CALIBRATIONthree times to trigger 

calibration if you re-locate the portable left 

and right speakers and skip Step 1 (calibrate 

the listening zone) after you completed a 

round of spatial calibration previously.

 

»

You can hear the calibration tones from the 

portable speakers. 

3 

Wait until the calibration tones end.

 

»

If the calibration succeeds, DONE (done) is 

displayed on the display panel. And the new 

settings are stored.

B5_12_UM_V2.0.indb   9

9/23/2014   1:26:47 PM