Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES 用户手册

Tagged VLAN. When you clear the Untagged VLAN check box, the wireless access point 

tags all frames that are sent from its Ethernet interface. Only incoming frames that are 
tagged with known VLAN IDs are accepted.

Management VLAN. The management VLAN can be active only when the wireless 

access point functions as a point-to-point or point-to-multipoint bridge (see 

on page 89). The management VLAN is used for managing traffic 

(Telnet, SNMP, and HTTP) to and from the wireless access point.

Frames belonging to the management VLAN are not given any 802.1Q header when they 
are sent over the trunk. If a port is in a single VLAN, it can be untagged. However, if the 
port is a member of multiple VLANs, it needs to be tagged.



Select Configuring > System > Advanced > General. The advanced General system 
settings screen displays:

Specify the settings as explained in the following table:

Spanning Tree Protocol Select the Enable radio button to enable STP to prevent path redundancy. By 

default, the Disable radio button is selected.

Untagged VLAN

Select the Untagged VLAN check box to configure one VLAN as an untagged 
VLAN. By default, the Untagged VLAN check box is selected.

Specify a VLAN ID. The default VLAN ID is 1.