Gossen Metrawatt M817R Mains-analysis device, Mains analyser M817R 数据表
产品代码
M817R
5-8
Current Probe Selection
Current Probe Selection
Selecting
current probe
current probe
Follow these steps to monitor current and select probe type.
Continued on next page
Action...
Result...
STEP 1: From the Start Menu,
press Wizard Setup.
• If current will not be
monitored, press Next. Go to
page 5-10.
• If current will be monitored,
press Change to display the
probe types available for each
channel. Proceed to Step 2.
• If using identical probe type for
all channels, press to enable Set
Identical
Identical
. The display will
change to show only one probe
selection. Press Change to
display the probe types
available. Proceed to Step 2.
• If you want to enable/disable
current channels, press to
select/deselect Enable
Currents
Currents
.
• Press Cancel to quit and return
to Start menu.
MARK101
MARK103
STEP 2: Select your desired
probe type.
NOTE: Use the same probes for
NOTE: Use the same probes for
the following: TR2500 for
TR2500A, TR2510 for TR2510A,
TR2520 for TR2520A.
• If the current probe that you are
using is not on the list, select
Other
Other
. Then press Scale to
define the CT scale factor on
the current probe. Proceed to
Step 3 on page 5-9.
EP104a