Soell Söll Carbonate hardness test kit for up to 100 tests 14066 产品宣传页
产品代码
14066
CH
CH test
For fresh and salt water
1 Fill the pipe up to the mark with the test water.
2 Slowly allow the indicator solution to drop in with
continual swivelling.
3 Count the drops until the colour change from blue
to yellow is complete.
Calculation:
Indicator drops x 0.5 = CH (°dH)
Indicator drops x 0.5 = CH (°dH)
A drop of indicator solution equals 0.5°dH.
Evaluation:
• If the determined value is 5°dH or more, the carbon
• If the determined value is 5°dH or more, the carbon
hardness is sufficient.
• If the value is below 5°dH the carbon hardness is
too low.
You will find important information on your measurement value at www.aqua-check.de.
Please observe the safety notes for handling chemicals (see rear).