Chauvin Arnoux P01120073Clip-on ammeter adapter 39 mm P01120073 用户手册
产品代码
P01120073
15
The PAC 22 current clamp measures DC or AC currents, without opening the circuit they are
flowing in. The current clamp is used as an accessory for multimeters, recorders, etc.
flowing in. The current clamp is used as an accessory for multimeters, recorders, etc.
This clamp measures DC currents up to 1400 A and AC currents up to 1000 A. It outputs the
form and amplitude of the current measured as a voltage image of the primary current.
form and amplitude of the current measured as a voltage image of the primary current.
The PAC 22 has two ranges, 1 mV/A and 10 mV/A, a zero adjust push button, auto off feature
to economise the battery power supply and two light indicators, one for faults (over-range /
incorrect zero reset), the other for power supply.
to economise the battery power supply and two light indicators, one for faults (over-range /
incorrect zero reset), the other for power supply.
1/ PRESENTATION
See descriptive diagram at the end of the User Manual.
➀
Passage of the conductor
➁
Jaws
➂
Protective non-slip guard
➃
Automatic zero DC button
➄
Red fault light (over range / incorrect zero adjustment)
➅
Green light indicating correct power supply
➆
3-position sliding switch (off / selection of 1 mV/A or 10 mV/A ranges)
➇
Hand-held parts
➈
Fitted lead 1.5 m
➉
BNC plugs
2/ DESCRIPTION