Insys GPRS 5.0 Ethernet 11-02-01-03-10.018 用户手册
产品代码
11-02-01-03-10.018
Functions
INSYS GPRS 5.0 Ethernet
42
Dez-06
PIN:
SIM card PIN. The PIN can consist of 4 to 8 digits. If no PIN is defined,
SIM cards with deactivated PINs may be used as well.
Note
Before inserting a new SIM card you have to ensure that the correct PIN
is stored. The PIN may need to be deleted. Otherwise the INSYS GPRS
5.0 Ethernet tries to login with a wrong PIN, which results in a locked
PIN if the attempt is repeated.
Before inserting a new SIM card you have to ensure that the correct PIN
is stored. The PIN may need to be deleted. Otherwise the INSYS GPRS
5.0 Ethernet tries to login with a wrong PIN, which results in a locked
PIN if the attempt is repeated.
APN:
APN (Access Point Name) of the GPRS provider. Maximum length 30
characters, e.g. web.vodafone.de
GSM logout
0
Function deactivated (default).
Interval:
1 .. 99
Logout interval in hours after device start;
1 minute after the logout from the GSM network
the INSYS GPRS 5.0 Ethernet will automatically
log in again. The timer is reset.
Note
If at the time of the logout a GPRS connection was established, this
connection will be interrupted.
If at the time of the logout a GPRS connection was established, this
connection will be interrupted.
Note
This function should be activated to enable the GSM/GPRS provider to
perform network updates.
This function should be activated to enable the GSM/GPRS provider to
perform network updates.
Dial-up number:
Phone number that marks the PPP remote terminal for the dialup.
When dialing in via GPRS, this must be *99***1# (default).
When dialing in via GSM CSD, the number of the used
ISPs must be used. Many ISPs offer individual speed dialing numbers.
PPP user name:
PPP user name; maximum length 20 characters.
PPP Password:
PPP password, maximum length 20 characters.
Interval for
0
Function deactivated (default).
connection test:
1 .. 255
Time in minutes, for which the connection
to the internet is periodically tested. If the test fails,
the connection is closed. Afterwards, a new
connection setup is started.
Note
To test the connection, a DNS query is started. For this test, about 100
byte of billable data traffic will incur.
To test the connection, a DNS query is started. For this test, about 100
byte of billable data traffic will incur.