DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC 数据表

©

 2014 DJI. All Rights Reserved. 

Remote Controllers

INSPIRE 1

  User Manual

Remote Controller Profile

The Inspire 1 Remote Controller is a multi-function wireless communication device that integrates the 

video downlink ground system and aircraft Remote Controller system. The video downlink and aircraft 

Remote Controller system operate at 2.4 GHz with maximum transmission distance of 2km. The remote 

controller features a number of camera functions, such as taking and previewing photos and video, and 

controlling gimbal motions. The remote controller is powered by a 2S rechargeable battery. The current 

battery level is displayed by LEDs on the front panel of the remote control.

 Compliance Version: The Remote Controller is compliant with both CE and FCC regulations.

 Operating Mode: Control can be set to Mode 1 , Mode 2. 

 Mode 1: The right stick serves as the throttle.

 Mode 2: The left stick serves as the throttle.

Do not operate more than 3 aircrafts within in the same area (size equivalent to a soccer field) to 

prevent transmission interference. 

Remote Controller Operations 

Powering On And Off The Remote Controller

The Inspire 1 remote controller is powered by a 2S rechargeable battery with a capacity of 6000mAh. The 

battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps below to power on 

your remote controller:

1.  When powered off, press the Power Button once and the Battery Level LEDs will display the current 

battery level. 

2.  Then, press and hold the Power Button to power on the remote controller. 

3. The Remote Controller will beep when it powers on. The Status LED will blink green (slave remote 

controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft. The 

Status LED will show a solid green light when linking is completed.

4.  Repeat step 2 to power off the remote controller after finish using it. 

Charging Remote Controller

Charge the remote controller via supplied charger.