DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC Scheda Tecnica
Codici prodotto
Inspire 1 with 2RC
24
©
2014 DJI. All Rights Reserved.
Remote Controllers
INSPIRE 1
User Manual
Remote Controller
Remote Controller Profile
The Inspire 1 Remote Controller is a multi-function wireless communication device that integrates the
video downlink ground system and aircraft Remote Controller system. The video downlink and aircraft
Remote Controller system operate at 2.4 GHz with maximum transmission distance of 2km. The remote
controller features a number of camera functions, such as taking and previewing photos and video, and
controlling gimbal motions. The remote controller is powered by a 2S rechargeable battery. The current
battery level is displayed by LEDs on the front panel of the remote control.
Compliance Version: The Remote Controller is compliant with both CE and FCC regulations.
Operating Mode: Control can be set to Mode 1 , Mode 2.
Mode 1: The right stick serves as the throttle.
Mode 2: The left stick serves as the throttle.
Do not operate more than 3 aircrafts within in the same area (size equivalent to a soccer field) to
prevent transmission interference.
Remote Controller Operations
Powering On And Off The Remote Controller
The Inspire 1 remote controller is powered by a 2S rechargeable battery with a capacity of 6000mAh. The
battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps below to power on
your remote controller:
1. When powered off, press the Power Button once and the Battery Level LEDs will display the current
battery level.
2. Then, press and hold the Power Button to power on the remote controller.
3. The Remote Controller will beep when it powers on. The Status LED will blink green (slave remote
controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft. The
Status LED will show a solid green light when linking is completed.
4. Repeat step 2 to power off the remote controller after finish using it.
Charging Remote Controller
Charge the remote controller via supplied charger.