DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC 数据表

产品代码

Inspire 1 with 2RC

Remote Controllers

INSPIRE 1

User Manual

Status LED

Alarm

Remote Controller Status

— Solid Red

chime

The remote controller set as "Master" but it is not

connected with the aircraft.

— Solid Green

chime

The remote controller set as "Master" and it is connected

with the aircraft.

— Solid Purple

D-D-

The remote controller set as "Slave" but it is not

connected with the aircraft.

— Solid Blue

D-D- chime

The remote controller set as "Slave" and it is connected

with the aircraft.

Slow Blinking Red D-D-D......

Remote controller error.

Red and Green/ Red and

Yellow Alternate Blinks

None

HD Downlink is disrupted.

RTH LED

Sound

Remote Controller Status.

— Solid White

chime

Aircraft is returning home.

Blinking White

D . . .

Sending Return to Home command to the aircraft.

Blinking White

DD .. .. ..

Aircraft Return to Home in progress.

The Remote Status Indicator will blink red, sound an alert, when the battery level is critically low.

Linking the Remote Controller

The remote controller is linked to your aircraft before delivery. Linking is only required when using a new

remote controller for the first time. Follow these steps to link a new remote controller:

1. Power on the remote controller and connect to the mobile device. Launch DJI Pilot app.

2. Power on the Intelligent Flight Battery.

3. Enter “Camera” view and tap on and then tap “Linking Remote Controller” button as shown below.

RC Control Setting

Remote Control Calibration

Stick Mode

Gimbal Pitch/Yaw

Reset gimbal yaw

Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.

Do not change unless familiar with your new mode.

You can customize the C1 and C2 buttons on the back

of the remote controller.

Linking Remote Controller