ConiuGo 700100107 EasyGuard II 700100107 用户手册
产品代码
700100107
37
Revision 9.0
GSM Alarm & Telemetry systems
For every part there are tables in which you can combine every action with one or
more events. In every line you have one action which you could customize. At the
end of the line you could see the name which you have predefined in the “Action
Settings”. So you can see for which action you change the settings. You could
change now when an action will be triggered, that means when the input values
changes. Basicly all settings have the value X. Possible values are:
X:
This input will be ignored
0:
For a triggering of these action, the input value must be 0
1:
For a triggering of these action, the input value must be 1
This values are generated by different events from internal processes or connected
peripherals (sensors, time frames, incoming SMS). The actual values you could see
online on the terminal screen which will be refreshed after every second after the
module is powered with energy. This values (0 or 1 or in case of the analog inputs
the meassured dimension) are important for the triggering of an action:
STATION-NAME
0h 0m 50s 1. 1. 2000
123456789ABC
DIGITAL INPUTS: 111111111111
DIGITAL OUTPUTS: 0000
TIME FRAMES: 000
SMS: 00000000
ANALOG INPUTS: 0000
Analog measurement of 1: 0 NONE
Analog measurement of 2: 0 NONE
Analog measurement of 3: 0 NONE
Analog measurement of 4: 0 NONE
Power: Sup.
GSM: 1
Operator: VODAFONE
Signal-quality: 22,0
SIM-card-status: #SIGNAL OK
Modem-status: OK
0h 0m 50s 1. 1. 2000
123456789ABC
DIGITAL INPUTS: 111111111111
DIGITAL OUTPUTS: 0000
TIME FRAMES: 000
SMS: 00000000
ANALOG INPUTS: 0000
Analog measurement of 1: 0 NONE
Analog measurement of 2: 0 NONE
Analog measurement of 3: 0 NONE
Analog measurement of 4: 0 NONE
Power: Sup.
GSM: 1
Operator: VODAFONE
Signal-quality: 22,0
SIM-card-status: #SIGNAL OK
Modem-status: OK
Modem-reset-status: 200,0
In the connection settings you will find the menues to combine events and actions. In
the first line (over the XXXX) you will find the short names
(in this case in Outgoing
SMS, SMS No. 1):
No. D_In PP A_ In Time GSM SMS HTime R NAME