Bauser BZ/IZ 12-24V/DC BZ/IZ Digital counter - Twin technology Assembly dimensions 45 x 22 mm 3840.2.1.1.1.2 Twin3 数据表
产品代码
3840.2.1.1.1.2 Twin3
10
Time, service or pulse counters with signal or relay output
and service LED, for DC only, 1 or 2 displays, ø 52 mm
and service LED, for DC only, 1 or 2 displays, ø 52 mm
type 4000.0 to 4091.0
Here you will find another multiple solution from BAUSER. With the Twin-service-counter
for time and pulses or cycles a counter can operate in the background. The requested ser-
vice intervals are programmed factory set. The background counter appears for approx.
10 seconds every time you switch-on. Choose your combination, we programme the fix
values according to your priorities.
If you require 2 permanent indications, even for this BAUSER has a solution: the 2-display
counter. Of course, we are able to offer an additional LED indication for signal and relay
output.
The counter type of the second display will be determined according to the following
chart. You have to amend the type no. 40XX.0 of the chart above according to the chart
beneath. i.e. for a HC in display 2, you have to change type 4060.0 into type 4060.1.
Digital counter with 1 display – on request with background counter
type
reset for the
notes
following counters
4000.0
HC
4010.0
PC
4020.0
HC
HC (bg) not resetable
4030.0
PC
PC (bg) not resetable
4040.0
HC + PC
both counters are resetable,
even PC (bg) while
appearing on the display
4050.0
PC + HC
both counters are resetable,
even HC (bg) while
appearing on the display
4060.0
STC
HC not resetable
4061.0
STC
HC not resetable
4070.0
SPC
PC not resetable
4071.0
SPC
PC not resetable
4080.0
STC
HC(bg) not resetable
4081.0
STC
HC (bg) not resetable
4090.0
SPC
PC (bg) not resetable
4091.0
SPC
PC (bg) not resetable
counter type
HC* without output, without LED
PC* without output, without LED
HC with HC (bg)* without output, without LED
PC with PC (bg)* without output, without LED
HC with PC (bg)* without output, without LED
PC with HC (bg)* without output, without LED
HC with STC (bg)* with relay output
HC with STC (bg)* with el. signal output
PC with SPC (bg)* with relay output
PC with SPC (bg)* with el. signal output
STC with HC (bg)* with relay output
STC with HC (bg)* with el. signal output
SPC with PC (bg)* with relay output
SPC with PC (bg)* with el. signal output
y
Digital time
and pulse counters
and pulse counters
type 4000.1 to 4091.1
type 4000.2 to 4091.2
type 4000.2 to 4091.2
front view
front view
display 1
display 2
LED indication service required
service LED
* HC = hour counter, PC = pulse counter, STC = service time counter,
SPC = service pulse counter, bg = background
Further counter types for display 2 are available on request.