Olimex Open Source Hardware ARDUINO-like development board OLIMEXINO-5510 OLIMEXINO-5510 用户手册

产品代码

OLIMEXINO-5510

OLIMEXINO-5510 User's Manual

doesn't get programmed via SBW try the TI_TST + TI_RST option.

The default position is OLI_TST closed + OLI_RST closed.

6.6.7 HW_SCL/SW_SCL and HW_SDA/SW_SDA

Note these jumpers must be moved together!

They configure either hardware or software SPI on the UEXT.

The default position is set for software SPI – SW_SCL closed + SW_SDA closed.

6.7 Additional hardware components

The components below are mounted on OLIMEXINO-5510 but are not discussed above. They are
listed here for completeness:

Reset button - used for hardware reset of the board

BUT – general purpose button

USB_BSL – used for starting the MSP430 bootstrap loader

Battery recharge circuit

Battery sense circuit on processor pin 25

LED1 (Green) – pin 26 + Power LED (Red)

Page 21 of 29