Olimex Open Source Hardware Low cost 32 bit PINGUINO MAPLE ARDUINO like development board PIC32-PINGUINO-MICRO PIC32-PINGUINO-MICRO 用户手册

OLIMEX© 2012

PIC32-PINGUINO-MICRO User's Manual

This section helps you set up the PIC32-PINGUINO-MICRO development board for the first time.
Please consider first the electrostatic warning to avoid damaging the board, then discover the 
hardware and software required to operate the board.
The procedure to power up the board is given, and a description of the default board behavior is 
detailed.

PIC32-PINGUINO-MICRO is shipped in a protective anti-static package. The board must not be 
exposed to high electrostatic potentials. A grounding strap or similar protective device should be 
worn when handling the board. Avoid touching the component pins or any other metallic element.

In order to set up the PIC32-PINGUINO-MICRO, the following items are required:

If using the free PINGUINO IDE the ONLY requirement is a miniUSB to USB-A cable to connect 
to a computer.

If you want to upgrade the bootloader, or program the board without the PINGUINO-IDE there are 
pinouts for ICSP programmer (note that there isn't a connector mounted). You can use our PIC-
KIT3 programmer for custom programming without PINGUINO IDE.

The PIC32-PINGUINO-MICRO board is self-powered by the miniUSB if it is connected to a USB 
hub of a computer. 

To enter bootloader mode – either power the board hold button BUT, press RST, release BUT; or 
hold BUT, power the board, release BUT

Page 9 of 29