Renkforce MP 8000 MP-8000 数据表
产品代码
MP-8000
24
7. Installation/Setup
The power amplifier can be set up on a level surface or installed in a 19“ rack.
When selecting the set-up or installation site, observe that direct sunlight, vibration, dust,
heat, cold and moisture must be avoided. There also must not be any strong transformers in the
device’s proximity.
device’s proximity.
Ensure sufficient ventilation when setting up the device with other equipment. Keep a suffi-
cient distance from heat sources. Never put up the power amplifier in direct proximity in of
heat sources. Do not point any strong spotlights or light sources towards the device. This may
cause overheating (danger of fire!).
heat sources. Do not point any strong spotlights or light sources towards the device. This may
cause overheating (danger of fire!).
Heat dissipation from the device must not be obstructed. Never place the device on any soft
surfaces such as a carpet or a bed. Never cover the device’s ventilation openings. Air circula-
tion must not be obstructed by objects such as magazines, tablecloths, curtains or similar. This
prevents heat dissipation from the device and may lead to overheating (danger of fire!).
tion must not be obstructed by objects such as magazines, tablecloths, curtains or similar. This
prevents heat dissipation from the device and may lead to overheating (danger of fire!).
Always remove both rack covers in operation if the device is rack-mounted!
Only operate the power amplifier on a stable underground that is not sensitive to heat, and in a
horizontal position; otherwise, air circulate is not warranted correctly.
Ensure secure attachment or stable set-up. The power amplifier is heavy and therefore poses
considerable danger of accidents.
Do not drill or screw any additional screws into the casing to mount the device. This may
expose dangerous voltage to touch.
Make sure that the connection cables are not squeezed or damaged by sharp edges. Always
place cables so that no one can trip over them or be caught in them. Danger of injury!
The cables must be sufficiently long. Do not put any mechanic strain on them. This may damage
the cables or device. There is a risk of dangerous electric shock.
Due to the diversity of furniture paints and polishes used, it is possible that the device’s feet will
leave visible residue on furniture due to chemical reaction. The device therefore should not be
placed on valuable furniture surfaces without any suitable protection.