Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 数据表
产品代码
6ED1057-3BA00-0AA8
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
Operating Instructions, 06/2014
Operating Instructions, 06/2014
289
5.3.4.2
Possible settings with LOGO!Soft Comfort
Sensor
Set your sensor type. (0 V to 10 V; 0 mA to 20 mA; 4 mA to 20 mA; PT100/PT1000; no
sensor)
With sensor type 4 mA to 20 mA the value range for the standardized value is 200 and 1000.
With sensor type 4 mA to 20 mA the value range for the standardized value is 200 and 1000.
Measurement range
Stipulate the measurement range. The measurement range is the value range shown for the
analog value.
LOGO!Soft Comfort then automatically calculates the gain and offset from this.
Gain and offset
If you want to set the gain, you can enter values between -10.00 and 10.00. The value 0
makes no sense, as, irrespective of the applied analog value, you will always obtain the
value 0 as a result.
If you wish to set the offset, enter values between -10000 and 10000.
If you wish to set the offset, enter values between -10000 and 10000.
Rounding error
LOGO!Soft Comfort calculates the gain and zero point offset with utmost precision, while
LOGO! calculates internally using whole numerical values; therefore, not all parameter
combinations are possible on LOGO!. In this case, prior to transferring to LOGO!, LOGO!Soft
Comfort detects a rounding error and proposes a possible replacement value range.