TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB 数据表
产品代码
TL-SG2216WEB
18
Gigabit Smart Switch
Connection
ChaCter 2
Ethernet Port
21C
Connect a Ethernet port of the Switch to the computer by RJ45 cable as the following
figure shown.
figure shown.
RJ45 Port
RJ45 Cable
Connecting the RJ45 Port
Figure 4-1
SFP Port
211
Connect the SFP port to a SFP module. If an SFP transceiver (purchased separately1
is installed in a slot and has a valid link on the port, the associated RJ45 port will be
disabled and cannot be used.
is installed in a slot and has a valid link on the port, the associated RJ45 port will be
disabled and cannot be used.
SFP Port
SFP Module
Inserting the SFP Module
Figure 4-2
Note: When using the SFP port with a 100Mbps module or a gigabit module, you
need to log on to the GUI (Graphical User Interface) of the Switch and configure its
corresponding Speed and Duplex mode on Switching→Port→Port Config page.
For 100Mbps module, please select 100MFD while select 1000MFD for gigabit module.
By default, the Speed and Duplex mode of SFP port is 1000MFD. TL-SG2452 features
4 individual SFP ports which support 1000M SFP module connection only.
need to log on to the GUI (Graphical User Interface) of the Switch and configure its
corresponding Speed and Duplex mode on Switching→Port→Port Config page.
For 100Mbps module, please select 100MFD while select 1000MFD for gigabit module.
By default, the Speed and Duplex mode of SFP port is 1000MFD. TL-SG2452 features
4 individual SFP ports which support 1000M SFP module connection only.
Connection