TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB 数据表

19

Gigabit Smart Switch

Connection

After completing the installation, please verify the following items:

There are 5~10cm of clearance around the sides of the device for ventilation and 

 

■

the air flow is adequate.

The voltage of the power supply meets the requirement of the input voltage of the device.

 

■

The power socket, device and rack are well grounded.

 

■

The device is correctly connected to other network devices.

 

■

Plug in the negative connector of the provided power cord into the power socket of the 
device, and the positive connector into a power outlet as the following figure shown.

Connecting to Power Supply

Figure 4-3  

Note: The figure is to illustrate the application and principle. The power plug you get 
from the package and the socket in your situation will comply with the regulation in 
your country, so they may differ from the figure above.

After the device is powered on, it begins the Power-On Self-Test. A series of tests run 
automatically to ensure the device functions properly. During this time, its LED indica-
tors will respond as follows:

The Power/PWR LED indicator will light on all the time.

 

■

After keeping off for several seconds, the LED indicators of all the ports will flash 

 

■

momentarily and then turn off again after the initialization.

The System/SYS LED indicator will flash, which represents a successful initialization.

 

■