Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Introduction

4

PowerScan™ PD9530/PBT9500/PM9500

The BC9xx0 base station, when paired with one or more PowerScan™ 9500 

readers, builds a Cordless Reading System for the collection, decoding and 

transmission of bar code data. It can be connected to a Host PC via RS-232, 

USB, or KBD Wedge, and is suited for single-cradle layouts. The BC91x0 

models also provide a spare battery charger slot.
The label on the cradle contains LED indicators and a multi-function button. 

When the button is pressed for less than 5 seconds, the cradle will transmit a 

"broadcast" message." When the broadcast is sent, all properly configured 

scanners (Radio RX Timeout set to keep the radio "awake") that are linked to 

that base and within radio range coverage will emit a beep and blink within 5 

seconds. This functionality is useful to: 

• verify which scanners are linked to a certain 

base station 

• detect a scanner forgotten somewhere

When the button is pressed for longer than 5 

seconds, all paired scanners will be unpaired.

The LEDs signal the BC9xx0-BT status, as shown in 

Aux

Yellow On = BC9xx0 is powered through an external power supply. 

Host

Yellow On = BC9xx0 is powered by the Host. 

Reader

Green On = the reader battery is completely charged. 

Red On = the reader battery is charging. 

Orange Blinking = reader battery fault - replace battery. 

Red / Green Alternatively Blinking = charging error - see "

.

Off = reader not in the cradle or not properly inserted.

Spare 

 

(BC91x0 
models 
only)

Green On = the spare battery is completely charged.

Orange Blinking = spare battery fault - replace spare battery. 

Red/Green Alternatively Blinking = charging error - see "

Off = no spare battery in the housing or battery not fully inserted.

Radio

Yellow Blinking = radio activity.

Ethernet 

 

(Ethernet 
models 
only)

Green Blinking = Ethernet activity.

See "

 for more 

specific details on the LEDs.