Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Introduction

6

PowerScan™ PD9530/PBT9500/PM9500

charge / charge cycles before needing replacement. This number is higher if 

partial discharging / recharging is adhered to rather than full / deep dis-

charging, 
The typical manufacturer advertised useful life of LI batteries is one to three 

years, depending on usage and number of charges, etc., after which they 

should be removed from service, especially in mission critical applications. 

Do not continue to use a battery that is showing excessive loss of capacity, it 

should be properly recycled / disposed of and replaced. For most applica-

tions, batteries should be replaced after one year of service to maintain cus-

tomer satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from the device in compliance 

with European Directive 2006/66/EC, 2011/65/EU, 2002/96/EC and 2012/

19/EU and subsequent modifications, US and China regulatory and others 

laws and regulations about the environment.

The reader is factory-configured with a standard set of default features. 

After scanning the interface bar code, you can select other options and cus-

tomize your reader through use of the instructions and programming bar 

code labels available in the corresponding features section for your inter-

face. Customizable settings for many features are found in 

starting on page 21. 

Some programming labels, like 

on page 18, 

require only the scan of the single label to enact the change. Most, however, 

require the reader to be placed in Programming Mode prior to scanning 

them. Scan an ENTER/EXIT bar code once to enter Programming Mode. Once 

the reader is in Programming Mode, scan a number of parameter settings 

before scanning the ENTER/EXIT bar code a second time, which will then 

accept your changes, exit Programming Mode and return the reader to nor-

mal operation.

Datalogic Aladdin™ is a multi-platform utility program providing a quick and 

user-friendly configuration method via the RS-232/USB-COM interface. 

Aladdin allows you to program the reader by selecting configuration com-

mands through a user-friendly graphical interface running on a PC. These 

commands are sent to the reader over the selected communication interface, 

or they can be printed as bar codes to be scanned. Aladdin also facilitates 

image capturing. 
In addition, Aladdin makes it easy to upgrade the handheld’s firmware, to 

attain the benefits of new reader features. Reference the Datalogic Aladdin™ 

Online Help for more details.
Aladdin is available for download free of charge on the Datalogic website.