Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Enter/Exit Programming Mode

238

PowerScan™ PD9530/PBT9500/PM9500

1. Link the PM9500 with a BC9xxx Base. 
2. With the PM9500, read a “Compatible Mode/Normal Mode Speed” pro-

gramming label on 

 to set “Low, Medium, or High Speed”.

3. Place the PM9500 into the BC9xxx. 

The Reader and Base will now be linked at the new programmed speed.

This feature can also be programmed using Datalogic Aladdin.

1. On the BC9xxx Base, change the Compatible mode parameter to low, 

intermediate, or high speed through Aladdin.

2. Place an unlinked PM9500 onto the BC9xxx base. 

The Reader and base will link at the new programmed speed.

In exceptionally noisy environments or in case of a high concentration of 

radio devices, Star system performance may be improved by configuring 

Frequency Agility. Frequency Agility parameters change the way the radio 

frequencies are used in a Star communication system. 
As when changing the System Speed, use the following procedure:

1. Link the PM9500 with a BC9xxx Base. 
2. With the PM9500, read one of the “Frequency Agility” programming 

labels below.

3. Place the PM9500 into the BC9xxx. 

Reader and Base will then be linked and the new frequencies handling will be 

operational.

DEFAULT

$CSTFA00

Use default fixed channel 

$CSTFA80

Enable frequency hopping

The channel is changed automatically