Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Enter/Exit Programming Mode

258

PowerScan™ PD9530/PBT9500/PM9500

Sets the identifier of the predefined strings.

$CPWEB

Set String ID

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 6 digits from the Alphanumeric charac-
ters in 

The ID characters must be represented by their hexa-
decimal ASCII code; if the first 2 digits are 0, this feature 
is disabled. End by scanning the ENTER/EXIT bar code 
again.

Make a mistake? Scan the CANCEL bar code to abort and 
not save the entry string. You can then start again at the 
beginning.

~

CANCEL

Sets the header of the predefined strings.

$CPWED

Set String Header

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at 
left followed by 32 digits from the Alphanumeric charac-
ters in 

The digits must be the hexadecimal ASCII representation 
of the desired characters. If less than the expected 
string of 16 characters are selected, scan the ENTER/
EXIT bar code to terminate the string.

 If the first 2 digits are 0, the feature is disabled. End by 
scanning the ENTER/EXIT bar code again.

Make a mistake? Scan the CANCEL bar code to abort and 
not save the entry string. You can then start again at the 
beginning.

~

CANCEL