Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Enter/Exit Programming Mode

262

PowerScan™ PD9530/PBT9500/PM9500

This feature defines the rules that will be used to send a QTY/CODE pair: 

0.  Code is transmitted with QTY field (and its predefined format) preced-

ing CODE field (and its predefined format) 

1.  Code is transmitted with CODE field (and its predefined format) preced-

ing QTY field (and its predefined format) 

2.  Code in CODE field is sent out for the number of times defined in the 

QTY field  

$CPWEH00\r

Qty precedes Code 

DEFAULT

$CPWEH01\r

Code precedes Qty

$CPWEH02\r

Code transmitted Qty times

This feature allows the insertion of a separator between Qty/Code pairs. 

DEFAULT

$CPWQP00\r

No separator

$CPWQP

Set Qty/Code string separator

To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the barcode at 
left. Next scan 1 digit from 

 (in 

the range 1-8) representing the number of characters to 
be used as separator. 

Finally, define the separator string by reading the 
desired characters from the ASCII table at the back of 
this manual, expressed in hexadecimal form. End by 
scanning the ENTER/EXIT bar code again.