Datalogic PowerScan PD9500 PD9530-HPK1 数据表

Scanning Features

Product Reference Guide

                           301

This feature Specifies the transmission ordering by symbology type, when 

Multiple Labels per Frame is enabled.Up to six symbologies can be selected. 

Zeroes must be added to pad the string to 12 characters if not using all six 

symbologies.
The labels are ordered first as specified in the output mask. Labels present 

in the volume but not specified will be transmitted as unspecified symbolo-

gies in random order as allowed by the reading time sequence. For each 

label decoded in the volume the reader signals the standard beeper and LED 

indications.
To specify the symbology order:

1. Determine the symbologies and order you want to specify.
2. Use 

 to find the 

hex values for up to six symbolo-

gies. 

3. Go to 

 and scan the ENTER/EXIT PROGRAMMING MODE bar code 

to enter Programming Mode.

4. Scan the bar code: “SELECT SYMBOLOGIES FOR MULTIPLE LABELS 

ORDERING”.

5. Scan the appropriate two alphanumeric characters from the keypad in 

, that represent the desired character/value in step 

2 above. 

6. Scan zeroes if needed to make a 12-character string.
7. When finished, scan the ENTER/EXIT PROGRAMMING MODE bar code to 

exit Programming Mode.

This completes the procedure. See 

 for some examples of how to 

set this feature.

Code 39

Data Matrix

Code 128

Aztec

24

 0E

0C

4E

‘2’ and ‘4’

‘0’ and ‘E’

‘0’ and ‘C’

‘4’ and ‘E’

 shows the hex value associated with each symbology.