Datalogic PowerScan PD9500 PD9530-HPK1 数据表

References

304

PowerScan™ PD9530/PBT9500/PM9500

When this feature is enabled, the base station and reader will keep their 

configurations synchronized. If a reader's configuration is altered by reading 

programming labels, this change is automatically transferred and updated in 

a linked base station. Likewise, if the base station's configuration is changed 

using Aladdin or by host commands, then the reader's configuration will 

automatically be updated if this feature is enabled.

This option specifies the delimiter character to be placed between the label 

data and radio address when address stamping is enabled.

Follow these instructions to select the delimiter character:

1. Determine the desired character, then find its hexadecimal equivalent 

on the 

 on the inside back cover. A setting of 00 specifies no 

delimiter character.

2. Go to 

 and scan the ENTER/EXIT PROGRAMMING MODE bar 

code to enter Programming Mode.

3. Scan the bar code: SET SOURCE RADIO ADDRESS DELIMITER CHARAC-

TER.

4. Scan the appropriate two digits from the keypad in 

, that represent the hexadecimal characters which were determined 

in the steps above. You will hear a two-beep indication after the last 

character.

5. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit.

No delimiter

character

, (comma)

- (dash)

/ (slash)

‘0’ and ‘0’

 ‘2’ and ‘C’

 ‘2’ and ‘D’

 ‘2’ AND ‘F’