Renkforce HIFI SYSTEM,CD-2000ME(CD PLAYE 29265c3 数据表

By purchasing this device, you have acquired a product designed to the state of the art and operationally 

reliable. Nevertheless, problems or errors may occur.
The following contains descriptions for the removal of possible interferences.

  Always observe the safety information.

No sound is audible:
•  A device of the playback chain is not activated (e.g. amplifier).
•  The wrong input has been chosen at the amplifier or the cables are connected incorrectly.
•  The volume controller at the amplifier is set to minimum.
•  Muting is activated at the amplifier (mute).

The CD is not played back:
•  The CD has not been put into the tray properly.
•  The CD is dirty or scratched.
•  The inserted CD is not an audio or MP3 CD.

The CD skips during playback:
•  The CD is dirty or scratched.
•  The CD has a pressing defect.
•  The device is subject to vibration when playing.

MP3 files from the USB data carrier are not played:
•  The MP3 file does not correspond to the standard.
•  The bit rate of the MP3 file is too high or too low.
•  The file name of the MP3 file cannot be read (special characters).
•  The USB data carrier is not in FAT32 format.
•  The CD player does not supply enough power for a USB hard disc. Therefore, only use a USB stick of a

hard disc with its own power supply (mains unit).

The encoding function is not working properly:
•  The CD is copy-protected.
•  The CD is dirty or scratched.
•  The CD has a pressing defect.
•  The device is subject to vibration when playing.