Samsung BN59-01012A 数据表

 - English

When you connect this product to a network, 
you can use network based applications and 
functions such as Smart Hub and BD-LIVE, and 
upgrade the product's software through the 
network connection. For more information about 
accessing and using Internet services, see the 
Network Services chapter of this manual on pages 
43~50. Instructions for configuring the 
network connection start below.

If you didn't configure your network connection 
during the initial settings procedure or you need 
to reset the network connection, follow the 
directions below.
Before you begin, contact your Internet Service 
Provider to find out if your IP address is static or 
dynamic. If it is dynamic, and you have a wired 
or wireless network, we recommend using the 
Automatic configuration procedures described 
below.
If you are connecting to a wired network, connect 
the product to your router using a LAN cable 
before you start the configuration procedure.
To begin configuring your network connection, 
follow these steps:
1.  In the Home screen, select Settings, and then 

press the 

 button.

2.  Select Network, and then press the 

 

button.

3.  Select Network Settings, and then press the 

 button. 

4.  Go to the instructions for Wired networks 

starting or the instructions for Wireless 
networks starting on the next page.

 

Ğ

After following Steps 1 to 3 above:
1.  In the Network Settings screen, change 

Network type to Wired. Then, select Connect 

and press the 

 button. The product 

detects the wired connection, verifies the 
network connection, and then connects to 
the network.

2.  When it is done, highlight Ok, and then 

press 

 button.

 

Ğ

If you have a static IP address or the automatic 
procedure does not work, you'll need to set the 
Network Settings values manually.
After following Steps 1 to 3 above:
1.  In the Network Settings screen, change 

Network type to Wired. Then, select Connect 

and press the 

 button. 

The product searches for a network, and 
then displays the connection failed message.

 

✎

If it is possible to connect the home cinema 
to your network wirelessly, select Change 
Network at this point, change the Network 
type to Wireless, and then go to the 

instructions for wireless networks on the next 
page.

2.  Use the :; buttons to select Ip Settings, 

and then press the 

 button. The Ip Settings 

screen appears.

3.  Select the Ip setting field, and then set it to 

Enter manually.

4.  Select a parameter to enter (Ip Address, for 

example), and then press 

. Use the 78 

buttons on the remote control to enter the 

numbers for the parameter. Or use the Num 

keypad to enter a parameter number. Press and 

hold the 123 button until the Num pad appears 

on the screen. When the Num pad appears, 

select a number using the 78:; button 

and then press the 

 button. Use the :; 

buttons on the remote control to move from 

entry field to entry field within a parameter. 

When done with one parameter, press the 

 button.

5.  Press the 7 or 8 button to move to another 

parameter, and then enter the numbers for 

that parameter following the instructions in 

Step 4.