Samsung BN59-01012A 数据表

 - English

Settings

6.  Repeat Steps 4 and 5 until you have filled in 

all parameters.

 

✎

You can get the network parameter values 
from your Internet provider.

7.  When finished entering all the parameter 

values, select Ok, and then press the 

 

button. The home cinema verifies the 
network connection and then connects to 
the network.

You can set up a wireless network connection in 
three ways:

 

- Wireless Automatic

 

- Wireless Manual

 

- WPS(PBC)
Before you configure the wireless network 
connection, disconnect any wireless network 
devices currently connected to the product 
or, if applicable, the product's current wired 
connection.

 

Ğ

After following Steps 1 to 3 in "Configuring Your 
Network Connection" on page 23:
1.  In the Network Settings screen, change 

Network type to Wireless. The product 

searches for and then displays a list of the 
available networks.

2.  Select the desired network, and then press 

the 

 button.

3.  On the Security screen, enter your network's 

security code or pass phrase. 
Enter letters by selecting a letter with 
78:; buttons, and then pressing 

 

button.

4.  When finished, select done, and then press 

the 

 button. The product verifies the 

network connection and then connects to 
the network.

 

✎

You should be able to find the security code or 
pass phrase on one of the set up screens you 
used to set up your router or modem.

 

Ğ

If you have a static IP address or the Automatic 
procedure does not work, you'll need to set the 
Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your 
Network Connection" on page 23:
1.  In the Network Settings screen, change 

Network type to Wireless. The product 

searches for and then displays a list of the 
available networks.

2.  Scroll through the list, select the desired 

network or Add Network, and then press the 

 button.

3.  If you selected a network in Step 2, go to 

Step 6.  
If you selected Add Network, go to Step 4.

4.  Enter your wireless network or wireless 

router's name.

Enter letters by selecting a letter with the 

78:; buttons, and then pressing the 

 button.

To display capital letters (or redisplay lower 
case letters if capital letters are displayed), 
select 

, and then press the 

 button.

To display symbols and punctuation, select 
123#&, and then press the 

 button. To 

redisplay letters, select 123#&, and then 

press the 

 button.

When finished, select done, and then press 

the 

 button. 

5.  On the Security type screen that appears, 

use the ,. buttons to select the network's 
Security type, and then press the 

 button. 

On the next screen, enter your network's 
security code or pass phrase.

Enter letters by selecting a letter with the 
78:; buttons, and then pressing the 

 button.

When finished, select done, and then press 
the 

 button. The product searches for the 

network.