Renkforce Blender 1276210 数据表

This product is suitable for chopping and mixing foodstuff. The product is also suitable for 

crushing ice cubes. The product features 2 speed settings and one pulse function. Power is 

supplied via a normal household power outlet.
It  is  intended  for  indoor  use  only.  Do  not  use  it  outdoors.  Contact  with  moisture,  e.g.  in 

bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If 

you use the product for purposes other than those described above, the product may be 

damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric 

shock etc. Read the instructions carefully and keep them. Make this product available to 

third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company 

names and product names are trademarks of their respective owners. All rights reserved.

•  Blender
•  Operating instructions

• Observe all safety instructions to avoid damage 

through improper use! Follow all warnings on the 

appliance.

• This  appliance  shall  not  be  used  by  children. 

Keep the appliance and its cord out of reach of 

children.

• This  appliance  can  be  used  by  persons  with 

reduced physical, sensory or mental capabilities 

or lack of experience and knowledge if they have 

been given supervision or instruction concerning 

use  of  the  appliance  in  a  safe  way  and  if  they 

understand the hazards involved.

• Children shall not play with the appliance.
• Always disconnect the appliance from the supply 

if it is left unattended and before assembling, 

disassembling or cleaning.

or damage to property. Such cases will invalidate the warranty/guarantee.
•  Be cautious when handling the sharp blades. That also applies when emptying 

the jar or during cleaning. This poses a risk of injury.

•  Keep hands, hair, clothes and kitchen utensils away from the blades during 

use, in order to prevent injuries and damaging the device. Scrapers may only 

be used when the device is not operated.

•  Always wait for rotating parts to come to a complete stop before cleaning the 

product or removing parts.

•  Turn off the product before removing the jar from the motor assembly.
•  Never turn on the product with the jar empty.
•  Do not use the product with boiling liquids or hot oil or fat. That could cause the 

lid to rise. Risk of burning!

•  All ingredients must not be warmer than room temperature.

•  Do  not  overload  the  product.  Use  the  product  not  longer  than  3  minutes 

continuously. After that, wait at least 10 minutes for the product to cool down 

to room temperature before operating it again.

•  The use of accessories not explicitly recommended by the manufacturer could 

cause injuries and damage. Only use original accessories.

•  Do not place any heavy objects on the product. 
•  Do not place any objects filled with liquids (such as vases) on or next to the 

product.

•  Do not place any objects with open flames (such as candles) on or next to the 

product.

•  Keep the product away from hot surfaces.
•  Never open the housing. Do not insert any objects into the housing.
•  Never leave the product unattended during use.
•  Make sure the lid is closed during operation.
•  There is a marking on the glass jar indicating the maximum filling quantity. This 

marking must not be exceeded.

•  Use this product only for mixing foodstuff.
•  Before connecting the power supply, check whether the current and voltage 

used match the specifications on the rating plate.

•  The mains outlet must be located near to the device and be easily accessible.
•  Never pull the mains plug from the socket by pulling at the cable. Always pull it 

from the mains socket using the intended grips.

•  Unplug the mains plug from the mains socket if you do not use the device for 

an extended period of time.

•  For safety reasons, always unplug the device in case of a thunderstorm.
•  Make sure that the mains cable is not squeezed, bent, damaged by sharp edges 

or put under mechanical stress. Avoid excessive thermal stress on the mains 

cable from extreme heat or cold. Do not modify the mains cable. Otherwise the 

mains cable may be damaged. A damaged mains cable can cause a deadly 

electric shock.

•  Do not touch the mains cable if it is damaged. First, power down the respective 

mains socket (e.g. via the respective circuit breaker) and then carefully pull the 

mains plug from the mains socket. Never use the product if the mains cable is 

damaged.

•  To  prevent  risks,  damaged  power  cables  may  only  be  replaced  by  the 

manufacturer, a professional workshop appointed by the manufacturer, or a 

similarly qualified person.

•  Never plug in or unplug the mains plug when your hands are wet.
•  Turn  off  the  product  before  disconnecting  the  power  plug  from  the  power 

outlet.

•  Do not leave packaging material lying around carelessly. These may become 

dangerous playing material for children.

•  Protect the product from extreme temperatures, direct sunlight, strong jolts, 

high humidity, moisture, flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation 

and  protect  it  from  any  accidental  use.  Safe  operation  can  no  longer  be 

guaranteed if the product:

 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a low 

height can damage the product.

•  Consult an expert when in doubt about operation, safety or connection of the 

device.

•  Maintenance, modifications and repairs are to be performed exclusively by an 

expert or at a qualified shop.

•  If you have questions which remain unanswered by these operating instructions, 

contact our technical support service or other technical personnel.