Renkforce 808577 用户手册
59
Function „Auto Switch Display Setting“
Here, the time interval for auto mode (see chapter 10 c) can be set. In the basic setting, the time interval
Here, the time interval for auto mode (see chapter 10 c) can be set. In the basic setting, the time interval
is 5 seconds.
Proceed as follows:
• Use the buttons „2“ and „8“ to pick the function „Auto Switch Display Setting“ and then push „
Proceed as follows:
• Use the buttons „2“ and „8“ to pick the function „Auto Switch Display Setting“ and then push „
“.
• Set the desired time interval in the range of 2 - 60 seconds with the buttons „2“ and „8“.
• Confirm the setting with „
• Confirm the setting with „
“.
• Push the button „MENU/ESC“ on the screen/DVR or the button „MENU“ on the IR remote control re-
peatedly to return to the respective previous menu or leave the OSD menu.
Function „Video Segment Sizes“
Set the maximum length of the individual video files (for manual recording or automatic recording). You can
Set the maximum length of the individual video files (for manual recording or automatic recording). You can
set 5, 10, 15 or 30 minutes.
Power outage, error on the memory card, etc. may cause damage to the recording. A short time
setting (e.g. 5 minutes) has benefits here but will cause many video files to be crated in case of
long recordings. These are difficult to play back.
Proceed as follows:
• Use the buttons „2“ and „8“ to pick the function „Video Segment Sizes“ and then push „
• Use the buttons „2“ and „8“ to pick the function „Video Segment Sizes“ and then push „
“.
• Use the buttons „2“ and „8“ to set how long the individual video files are allowed to be (can be set to
5, 10, 15 and 30 minutes).
• Confirm the setting with „
“.
• Push the button „MENU/ESC“ on the screen/DVR or the button „MENU“ on the IR remote control re-
peatedly to return to the respective previous menu or leave the OSD menu.