Lecroy WAVEACE 2034 4-channel oscilloscope, Digital Storage oscilloscope, WaveAce 2034 用户手册
产品代码
WaveAce 2034
Operator's Manual
920836 Rev A
51
SAVE/RECALL SETUP - *RCL
Description
The *RCL command sets the state of your instrument, using one of the six non-volatile panel
setups (Panel 1 to Panel 6), by recalling the complete front panel setup of the oscilloscope.
Entering panel setup 0 corresponds to the default panel setup.
setups (Panel 1 to Panel 6), by recalling the complete front panel setup of the oscilloscope.
Entering panel setup 0 corresponds to the default panel setup.
The *RCL command produces an effect the opposite of the *SAV command.
If the desired panel setup is not acceptable, the EXecution error status Register (EXR) is set and
the EXE bit of the standard Event Status Register (ESR) is set.
the EXE bit of the standard Event Status Register (ESR) is set.
Command Syntax
*RCL <panel_setup>
<panel_setup>:= 0 to 6
Example
The following instruction recalls your instrument setup previously stored in panel setup 3:
*RCL 3
Related Commands
*SAV, EXR?
SAVE/RECALL SETUP - *RST
Description
The *RST command initiates a device reset. *RST sets all eight traces to the GND line and recalls
the default setup.
the default setup.
Command Syntax
*RST
Related Commands
*CAL?