Smartwares 10.001.32 用户手册
Page 34
Figure 4.4 Motion Detection
【Channel 】Select the channel to set up motion detection area;
【Enable】Highlight ■ to enable the Motion Detection function. Corresponding settings can only be
defined after Enable is ticked;
【Sensitivity】Six settings based on sensitivity level;
【Region】Click Setting to enter the area which is divided into PAL22X18. Colored areas are the
areas covered by motion detection while dark areas are not covered. Set areas as Figure 4.5. Hold
down the left mouse button to toggle the grid blocks.
(All areas default to covered)
Figure 4.5 Set Area
【Arm/Disarm Schedule】 DVR triggers motion detection alarm signal only during the time periods
set up as in Figure 4.6. Recording can be scheduled weekly or in a general calendar. Each day is
divided into four time sections. The time range will take effect only if the checkbox
■ before the time
range is ticked.